Crystal-field engineering of ultrabroadband mid-infrared emission in Co2+-doped nano-chalcogenide glass composites

Tunable and ultrabroadband mid-infrared (MIR) emissions in the range of 2.5–4.5 μm are firstly reported from Co²⁺-doped nano-chalcogenide (ChG) glass composites. The composites embedded with a variety of binary (ZnS, CdS, ZnSe) and ternary (ZnCdS, ZnSSe) ChG nanocrystals (NCs) can be readily obtained by a simple one-step thermal annealing method. They are highly transparent in the near- and mid-infrared wavelength region. Low-cost and commercially available Er³⁺-doped fiber lasers can be used as the excitation source. By crystal-field engineering of the embedded NCs through cation- or anion-substitution, the emission properties of Co²⁺ including its emission peak wavelength and bandwidth can be tailored in a broad spectral range. The phenomena can be accounted for by crystal-field theory. Such nano-ChG composites, perfectly filling the 3–4 μm spectral gap between the oscillations of Cr²⁺ and Fe²⁺ doped IIVI ChG crystals, may find important MIR photonic applications (e.g., gas sensing), or can be used directly as an efficient pump source for Fe²⁺: IIVI crystals which are suffering from lack of pump sources.     

Surface engineering of CeO2–TiO2 composite electrode for enhanced electron transport characteristics and alkaline hydrogen evolution reaction

Herein, we report the fine tuning of electrocatalytic characteristics of CeO₂–TiO₂ composite by surface engineering to reduce overpotential and to improve exchange current density for enhanced alkaline hydrogen evolution reaction (HER). The enhanced electrocatalytic activity of the surface engineered CeO₂–TiO₂ composite through Ni and P decoration is attributed to the improved electron transport ability. The surface roughness characteristics and surface composition of electroactive species are tuned to generate high electronic conductivity on the surface engineered composite electrode surface. The developed hard electrode with leptokurtic surface (S_ku > 3) exhibited a high average roughness value (Sa) of 3 μm due to incorporation of the mesoporous catalyst material into it. Tuning of a compact and continuous electrode surface with critical composition of elements Ni (52 at.%), P (20 at.%), Ce (9 at.%) and Ti (8 at.%) furnishes the high conductivity (contact potential difference = 0.83 V) to the electrode. The developed electrode with surface engineered CeO₂–TiO₂ catalyst exhibited a low overpotential of −111 mV (at a high current density of 250 mA cm⁻²) and high exchange current density (1.6 × 10⁻¹ mA cm⁻²) with low charge transfer resistance (615 Ω cm²). High electrocatalytic activity and stability of the surface engineered CeO₂–TiO₂ catalyst electrode during alkaline (32 w/v.% NaOH) HER ensure its promising performance and applicability for long term HER.     

配网工程建设时间控制

时间控制是运用科学的方法、工具,并综合运用现有资源,在规定时间内取得预期效果的一种控制手段。本文从工程时间管理的概念出发,研究了如何运用时间管理方法实现工程施工工期的管理,讨论了时间管理在工程建设中的重要性,为企业配网工程建设时间控制管理提供参考。     

异丙醇铝控制水解制备高纯拟薄水铝石和多孔氧化铝

主要进行异丙醇铝水解制备高纯拟薄水铝石和高纯多孔γ-Al_2O_3的研究。合成路线以异丙醇铝为原料,改变反应过程中水化液组成、水化温度和水化时间,制备一系列拟薄水铝石及其焙烧产物多孔γ-Al_2O_3。结果表明,水化液中异丙醇的存在会抑制无定型氢氧化铝的晶化,但也有助于形成大孔径、高比表面和大孔容的氧化铝;纯水体系下,60℃以下水化会出现三水铝石,60℃以上水化的产物则为拟薄水铝石;γ-Al_2O_3孔结构与前驱体拟薄水铝石的结晶度有关,晶粒越大的拟薄水铝石,焙烧所得氧化铝的孔径和孔容也增大。因此,水化条件的改变可以实现拟薄水铝石结构的控制,进而获得不同结构的多孔氧化铝。为由异丙醇铝水解制备高纯拟薄水铝石和多孔氧化铝的工业化提供相应的研究基础。     

Human Cellular Retinol Binding Protein II Forms a Domain-Swapped Trimer Representing a Novel Fold and a New Template for Protein Engineering

Domain-swapping is a mechanism for evolving new protein structure from extant scaffolds, and has been an efficient protein-engineering strategy for tailoring functional diversity. However, domain swapping can only be exploited if it can be controlled, especially in cases where various folds can coexist. Herein, we describe the structure of a domain-swapped trimer of the iLBP family member hCRBPII, and suggest a mechanism for domain-swapped trimerization. It is further shown that domain-swapped trimerization can be favored by strategic installation of a disulfide bond, thus demonstrating a strategy for fold control. We further show the domain-swapped trimer to be a useful protein design template by installing a high-affinity metal binding site through the introduction of a single mutation, taking advantage of its threefold symmetry. Together, these studies show how nature can promote oligomerization, stabilize a specific oligomer, and generate new function with minimal changes to the protein sequence.     

一种液压摩擦焊机电液系统研究与试验

针对海上石油平台、海底输送管线维修的需要,提供了一种液压摩擦焊机液压和电器系统设计思路,通过参数计算、电液控制系统设计,研发了一种液压摩擦焊机,通过对DH38钢摩擦叠焊单元成型工艺试验,发现焊接接头拉伸强度达到了母材强度的76%以上,验证了液压摩擦焊机的可靠性能,通过该研究的应用,可对海上石油平台、海底输送管线的维修起到积极作用。     

谈如何在预可研阶段做好工程造价控制

工程造价控制是现代工程建设、管理的核心工作之一,要求在现有基础上不断予以完善。本文以预可研阶段工程造价控制作为分析对象,论述该阶段工程造价控制的关键点,再以此为基础,分析预可研阶段的工程造价控制思路,最后从递进关联的角度,就工程造价控制的后续方法进行论述,给出构建精细化作业模式、加强数据挖掘和复用、重点项目的拆分等内容,服务后续工作。     

低能量密度炸药连续装药光面爆破技术研究

为了提高光面爆破成型质量，提出了一种低能量密度炸药连续装药光面爆破技术，利用LS DYNA进行数值模拟，对比2#岩石乳化炸药间隔装药和低能量密度炸药连续装药的应力场，然后将此技术用于长九（神山）灰岩矿四号隧洞控制爆破和露天边坡光面爆破。结果表明：2#岩石乳化炸药间隔装药模型中，装药段与非装药段测点应力峰值相差很大；而在低能量密度炸药连续装药模型中，沿炮孔轴向相同爆心距的测点应力峰值保持一致；使用低能量密度炸药进行连续装药，能够避免装药段的过度破坏和非装药段的欠挖，提高残孔率，且省去了导爆索捆绑时间，提高周边孔装药效率，节省了爆破成本。     

BIM技术在地下工程中的应用分析及展望

BIM技术以三维设计为基础,以数字信息为载体,将建筑信息贯穿于建筑的全生命周期中。然而由于地下工程的内部结构较为复杂,受地质条件影响较大,BIM技术在地下工程中的应用并不多见。叙述了BIM技术在隧道、地铁和矿井建设几种地下工程中应用的现状,并对几个典型案例进行分析,指出了BIM技术在地上工程和地下工程中应用的异同。最后,提出了目前BIM技术在地下工程中应用的问题以及对未来发展的建议。为推动BIM在我国地下工程中更广泛深入的应用提供重要参考价值。     

水泵水轮机导叶动态水力矩特性分析

采用SST k-ω湍流模型对某高水头水泵水轮机进行全流道三维非定常数值模拟,分别对在水轮机工况和水泵工况运行下的导叶动态力矩特性进行分析。结果表明:在水轮机工况下,随着流量的增大,不同位置处导叶的动态水力矩变化规律一致,力矩值由正值变为负值,力矩脉动频率与转轮叶片数相关,流量越大,叶频影响越显著;在水泵工况下,最高扬程工况时导叶水力矩脉动频率主频为转频且脉动幅值较大,而最低扬程工况下导叶水力矩脉动主频为叶频,力矩脉动幅值较小。